武汉理工大学

武汉理工大学材料科学与工程学院研究生导师黄健介绍如下：

一、姓名：黄健

二、基本情况：

1、出生年月：1982年10月       
2、学位：博士研究生
3、职称：副研究员
4、工作院系：绿色建筑材料及制造教育部工程研究中心

三、教育经历（从大学开始）：

2001/09–2005/07 华南理工大学，材料科学与工程学院，获高分子材料与工程学士学位；
2005/09–2006/12，英国拉夫堡大学（Loughborough University），材料学院（IPTME），获高分子技术硕士学位（M.Sc.）；
2006/12–2010/12，英国拉夫堡大学（Loughborough University），材料学院（Department of Materials），获博士学位（Ph. D.）。

四、工作经历：

2011 年4 月-2013 年12 月      武汉理工大学，绿色建筑材料与制造教育部工程中心，助理研究员；
2013 年12 月-今               武汉理工大学，绿色建筑材料与制造教育部工程中心，副研究员。

五、研究领域（不多于3个）：

聚合物功能化改性，功能型建筑节能材料、绿色混凝土外加剂

六、科研项目（不多于5项）：

1. 国家自然科学基金青年基金项目：光热氧化条件下新型双峰聚乙烯分子结构稳定性的研究（51303146，2014.1~2016.12）
2. 国家十二五科技支撑项目：功能化复合墙体板材应用技术研究（2011BAJ04B02，2011.1-2014.12）
3. 国家十二五科技支撑项目：低成本、低能耗建筑节能关键技术集成研究与示范（2011BAJ03B03, 2011.1-2015.12）
4. 国家十二五科技支撑项目：村镇功能型建筑材料研发与集成示范（2012BAJ20B00, 2012.1-2015.12）
5. 企业横向：绿色混凝土外加剂制备技术研究与开发战略合作（20121h0294，2012.1-2014.12）

七、代表性论文及著作（不多于10项）：

1. Microstructure and Mechanical Properties of Poly (Vinyl Chloride) Modified by Silica Fume/Acrylic Core-Shell Impact Modifier Blends, Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27(5), pp886-891.
2. The Effect of Polypropylene Skin on the Properties and Structure of PE/PP Dual Layer Pressure Pipe, Polymer Engineering and Science, 2012, 52 (5), pp 1081-1088.
3. Effect of a Polypropylene Skin on the Hardness of Polyethylene Pipe, Advanced Materials Research, 2012, 578, pp 197-201.
4. Performance similarity of an SAE latex and VAc/E type redispersible powder on cement mortar used on an expandable polystyrene panel, Advanced Materials Research, 2013, 700, pp 195-198.
5. Preparation of Styrene-Acrylate Emulsion (SAE) Latex by Recycling Waste Expandable Polystyrene Foam,       Advanced Materials Research, 2013, 700, pp 199-203.
6. 氮-磷膨胀阻燃剂对聚苯乙烯泡沫的阻燃改性，武汉理工大学学报，2013, 35(9), pp 30-35.
7. 废聚苯乙烯泡沫再生乳液对砂浆增粘增韧研究，武汉理工大学学报，2013, 35(9), 45-49.
8. 聚羧酸减水剂在C50混凝土中的应用研究，公路，2013, 4, pp 175-178.
9. 一种环保型高性能防水阻燃型抹灰砂浆及其制备方法，授权发明专利，ZL201210006483.7.
10. 一种水溶性不燃陶瓷防辐射涂料及其制备方法，授权发明专利，ZL201210006491.1.

八、联系方式：

1、Tel： +86-13886156895
2、E-mail：JHuang@whut.edu.cn；3841644@qq.com
3、工作地址（实验室）：武汉理工大学硅酸盐建筑材料国家重点实验室水混楼307室

1.Name: HUANG Jian
2.Brief introduction:
1)Date of birth: Oct 1982
2)Degree: Ph.D.
3)Title: Associate Researcher
4)Working department: The Green Building Materials and Manufacturing Engineering Research Center of Ministry of Education
3.Education experience(after entering university):
2001/09-2005/07, South China University of Technology, School of Materials Science and Engineering, Bachelor’s Degree on Polymer Materials and Engineering;
2005/09-2006/12, Loughborough University (UK), IPTME, M.Sc. on Polymer Technology with Extinction;
2006/12-2010/12, Loughborough University (UK), Department of Materials, Ph.D.
4.Working experience:
2011/04-2013/12 Wuhan University of Technology, The Green Building Materials and Manufacturing Engineering Research Center of Ministry of Education, Assistant Researcher;
2013 /12-present Wuhan University of Technology, The Green Building Materials and Manufacturing Engineering Research Center of Ministry of Education, Associate Researcher.
5.Research field(no more than 3):
Functionalization of Polymers, Functional Energy-Saving Materials for Architectures, Green Admixtures for Cement and Concrete.
6.Research project(no more than 5):
1. Research on Molecular Structure Stability of Novel Bimodal Polyethylene under Conditions of Photo Thermal Oxidation (51303146, 2014.1~2016.12).
2. The Twelfth Five-Year National Plan for Science & Technology: Research on Application Technologies for Functional Composite Panels Materials for External Wall (2011BAJ04B02, 2011.1-2014.12).
3. The Twelfth Five-Year National Plan for Science & Technology: Research and Demonstrations on Key Technology Integration of Building Energy Saving with Low Cost and Energy Consumption. (2011BAJ03B03, 2011.1-2015.12).
4. The Twelfth Five-Year National Plan for Science & Technology: Research and Integration Demonstrations on Functional Materials for Architectures in Suburb. (2012BAJ20B00, 2012.1-2015.12).
5. Industrial Projects: Research and Development on Preparation Technology for Green Cement and Concrete Admixtures. (20121h0294, 2012.1-2014.12).
7. Representative papers and works(no more than 10):
1. Microstructure and Mechanical Properties of Poly (Vinyl Chloride) Modified by Silica Fume/Acrylic Core-Shell Impact Modifier Blends, Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27(5), pp886-891.
2. The Effect of Polypropylene Skin on the Properties and Structure of PE/PP Dual Layer Pressure Pipe,Polymer Engineering and Science, 2012, 52(5), pp 1081-1088.
3. Effect of a Polypropylene Skin on the Hardness of Polyethylene Pipe,    Advanced Materials Research, 2012, 578, pp 197-201.
4. Performance similarity of an SAE latex and VAc/E type redispersible powder on cement mortar used on an expandable polystyrene panel, Advanced Materials Research, 2013, 700, pp 195-198.
5. Preparation of Styrene-Acrylate Emulsion (SAE) Latex by Recycling Waste Expandable Polystyrene Foam,Advanced Materials Research, 2013, 700, pp 199-203.
6. Flame Retardation Modificationon Polystyrene Foamby Nitrogen-phosphorus Intumesent Flame Retardant, Journal of Wuhan University of Technology, 2013, 35(9), pp 30-35.
7. Research on Tackifying and Toughening Modification on Cement Mortar by Emulsion Made from Waste Polystyrene Foam, Journal of Wuhan University of Technology, 2013, 35(9), 45-49.
8. Research on Application of Polycarboxylate Superplasticizer on C50 Concrete, Highway, 2013, 4, pp 175-178.
9. A Preparation Method for Environmental Friendly High Performance Fire-Retarded Water-Proofed Mortar, Chinese Patent,       ZL201210006483.7.
10. A Preparation Method for Water-Soluble Incombustible Radiation-Resistant Chinese Patent,ZL201210006491.1.
8. Contact information:
1) Tel: +86-13886156895
2) E-mail: JHuang@whut.edu.cn；3841644@qq.com
3) Location of lab: Room 307, Cement and Concrete Mansion, State Key Lab of Silicate Materials for Architectures, East Campus, Wuhan University of Technology.