中国矿业大学（徐州）

个人简介

亓健伟，男，1983年12月出生，山东郓城人，副教授，硕导。2007年7月于青岛大学材料科学与工程系毕业，获学士学位;2012年7月毕业于中科院兰州化学物理研究所固体润滑国家重点实验室，获工学博士学位(硕博连读培养)。主要研究方向为材料表面工程、耐磨材料、生物材料及摩擦学。主持国家自然科学基金1项，江苏省自然科学基金1项，中央高校基本科研业务费专项资金项目1项，中国博士后基金1项，江苏省博士后基金1项，国家重点实验室开放基金2项;参与国家重点基础研究发展计划(973计划)、863计划及国家自然科学基金等科研项目数项。出版专著1部，目前已发表SCI论文10余篇，申请国家发明专利2项，授权1项。现讲授《材料科学概论》、《先进材料导论》、《复合材料》、《材料改性实验》和《新材料导论》等课程。

Email：jianweiqi@cumt.edu.cn

研究领域

主要研究领域：1. 涂层/薄膜制备;2. 生物材料及生物摩擦;3. 静电纺丝

发表论文

1. Jianwei Qi, Liping Wang*, Fengyuan Yan and Qunji Xue, Ultra-high tribological performance of magnetron sputtered a-C:H films in sand-dust environment, Tribol. Lett. 38(3),195-205, 2010.

2. Jianwei Qi, Liping Wang*, Fengyuan Yan and Qunji Xue, Comparative study of microstructure and tribological behavior of TiC/a-C:H and a-C:H coatings in a sand-dust environment, Surf. Interface Anal. 43(4), 836–846, 2011.

3. Jianwei Qi, Liping Wang*, Fengyuan Yan, Qunji Xue, The tribological performance of selected solid lubricant films in sand-dust environments, Wear, 271(5-6), 899-910, 2011.

4. Lichun Bai, Jianwei Qi, Zhibin Lu, Guangan Zhang, Liping Wang, Yunfeng Wang, Zhiguo Wu, Pengxun Yan, Theoretical Study on Tribological Mechanism of Solid Lubricating Films in a Sand–Dust Environment, Tribol. Lett. 49(3), 545–551, 2013.

5. Jianwei Qi, Liping Wang, Fengyuan Yan and Qunji Xue, The tribological performance of DLC-based coating under the solid-liquid lubrication system with sand-dust particles, Wear, 297(1-2), 972-985, 2013.

6. Jianwei Qi, Hongtao Liu, Yong Luo, Dekun Zhang, Yongxin Wang, Influences of added sand-dust particles on the tribological performance of graphite-like coating under solid–liquid lubrication, Tribol. Int. 71, 69–81, 2014.

7. Cheng Xu, Peng Yi, Heliang Fan, Jianwei Qi, Yinghuai Qiang, Jiongtian Liu,Chunxian Tao, Dawei Li, Correlations between the oxygen deficiency and the laser damageresistance of different oxide films, Applied Surface Science 289 (2014) 141-144.

8. Cheng Xu, Peng Yi, Heliang Fan, Jianwei Qi, Shuai Yang, Yinghuai Qiang, Jiongtian Liu, Dawei Li, Preparation of high laser-induced damage threshold Ta2O5filmsCheng, Applied Surface Science 309 (2014) 194–199.

9. Tianchi Chen, Shirong Ge, Hongtao Liu, ,Qinghe Sun, Wei Zhu, Wei Yan, Jianwei Qi, Fabrication of low adhesive superhydrophobic surfaces using nano Cu/Al2O3 Ni–Cr composited electro-brush plating, Applied Surface Science, 356 (2015) 81–90.

10. Cheng Xu, Dawei Li, Heliang Fan, Jianxin Deng, Jianwei Qi, Peng Yi, Yinghuai Qiang, Effects of different post-treatment methods on optical properties, absorption and nanosecond laser-induced damage threshold of Ta2O5 films, Thin Solid Films, 580 ( 2015) 12–20.

11. Cheng Xu, Dawei Li, Heliang Fan, Jianwei Qi, Jianxin Deng, Shuai Yang, Peng Yi, Yinghuai Qiang, Laser-induced damage of Ta2O5 films obtained from TaCl5 precursor and annealed at different temperatures, Applied Surface Science, 344, 2015, 137–145.

12. Cheng Xu , Heliang Fan, Dawei Li, Jianwei Qi, Shuai Yang, Yinghuai Qiang, Comparative studies on the laser-induced damage of TiO2 films with different additives and thickness, Optik - International Journal for Light and Electron Optics, 24(126), 2015, 5478–5482.

13. Kai Chen, Dekun Zhang, Xuehui Yang, Zhang Xin, Jianwei Qi, Swing Friction Behavior of the Contact Interface Between CoCrMo and UHMWPE Under Dynamic Loading, Journal of Materials Engineering and Performance, 25(12),2016, 5400-5410.

14. Linmin Xu, Dekun Zhang, Kai Chen, Xuehui Yang, Qingliang Wang and Jianwei Qi, Tribological Behavior of Diamondlike Carbon Film-Deposited Ti6Al4V Alloy Swinging Against Ultrahigh Molecular Weight Polyethylene in Fetal Bovine Serum, J. Tribol 139(3), 031301.

15. 许林敏;张德坤;陈凯;杨雪晖;王庆良;亓健伟, 类金刚石薄膜改性钛合金的扭动摩擦磨损特性, 中国表面工程， 29(4)， 2016

16. 崔晓彤;刘金龙;张德坤;陈凯;亓健伟，不同接触尺度下PVA/HA复合水凝胶的滑动摩擦行为，材料工程， 44(5)， 2016

17. 冯存傲;张德坤;亓健伟;王高磊，低速重载工况下润滑介质对齿轮材料滚动疲劳的影响，煤炭学报， 40(11)， 2015

出版专著和教材

亓健伟;阎逢元，固体润滑薄膜抗沙尘损失设计与摩擦学行为研究，中国矿业大学出版社, 徐州，2014.

科研创新

专利：

1. 王立平;亓健伟;王云锋;薛群基; 类金刚石复合二硫化钼纳米多层薄膜及其制备方法，发明专利，专利号：ZL201110277261.4

2. 亓健伟;刘洪涛;罗勇;张德坤;王庆良，抗菌类金刚石/羟基磷灰石梯度多元纳米涂层的制备方法，发明专利，专利号：ZL20140139015.6

3. 亓健伟，贺丹枫，王庆良，陈章波，一种髋关节假体柄表面纳米生物活性涂层及其制备方法，发明专利， 专利号：CN201610136729.0

教学活动

主讲《复合材料》、《材料改性实验》、《先进材料导论》、《新材料导论》等课程。

指导学生情况

硕士研究生：任夫虎，贺丹枫，陈章波，杨意鸣